For further information
We always answer within 24h.
Call our switchboard and we’ll connect you to the right person!
Machine protection doors
A machine guard/machine protection door screens off a production cell so that the operator can work close to the cell, saving space on the work floor. Patented safety features in the NORDIC 344 doors make sure the work process can not start until the door is fully closed. The door also keeps weld spatter, noise and dust away from the operator.
The doors are quiet, open and close quickly at up to 2,5 m/s, making production run smoothly.
A machine guard door from NORDIC door has a long life and low operating costs. In other words, it is a long-term and cost-effective investment. The door can be fully customized to your requirements and is available as standard in sizes up to 4×4m.
We develop and manufacture the doors inhouse in Halmstad, Sweden, which means that you are close to expertise, quick access to spare parts and know-how for special solutions if needed.
Increases personal safety – especially when working near automated machinery.
Safety photocell curtain protects the entire door opening touchless when closing.
Can only be pushed in a limited distance, why the door can be located closer to the workstation.
High-speed machine protection doors with advanced vector control with soft start/soft stop for low noise level.
For maximum safety, the cat. 4 safety switch in the frames provides a safe signal when the door is closed.
The NORDIC 344-protec and 344-rollback have door panels built up by two layers of mono/multifilament fabric, coated with PVC. The door panel is 2 mm thick and extremely durable. It has a smooth finish, is resistant to most chemicals and even weld spatter. It is also antistatic.
The edges of the door panel have integrated edge holders, preventing the door panel from being pushed out – a patented safety feature.
The door panel, available in a number of different colours, can also be supplied with a 2 mm, seamless welded-in, vison panel, transparent or bronze-eye protective, which is extremely resistant to wear, just like the rest of the door panel.
The standard panels Blue (RAL5007) and grey (RAL7038), have additional carbon fibres woven into the fabric, efficiently leading off any static electricity. Optional colours are: Yellow (RAL1023), Red (RAL3000), Orange (RAL 2004), Anthracite grey (RAL7016), White (RAL9010) and Green (RAL6005).
The drive system, NORDIC DRIVE A4.0, consists of a robust worm gear drive and an advanced vector-inverter control with monitored brake function. The worm gear, which is heavily dimensioned, can handle up to 10 openings per minute and has an integrated absolute encoder (battery less). The system as standard meets class 2, PLc, but can optionally be programmed to meet cat2, PLd.
The drive system is as standard built for supply for 1x230V 50Hz, but can optionally be built for supply 3x400V, 50-60Hz.
Opening speed up to 2,5 m/s.
Closing speed up to 1,2 m/s.
The speeds can easily be adjusted from the display. Automatic closing with adjustable time, is easily programmed from the display.
The NORDIC machine protection doors have as standard safety switches integrated in the frames, providing a safe signal (cat 4, PLe) when the door is closed. To allow different stop positions of the door, the position of the switch in the frame can easily be adjusted.
The NORDIC 344-prolock is a further development to provide additional safety by locking the door mechanically from being opened before the machine behind has come to a complete stop.
This new safety device consists of a safety switch and an actuator, providing a safe signal (cat 4, PLe) when the door is closed. When the door is closed, the actuator is also mechanically locked into the safety switch. (safety: B100: 2 ×10 6 cycles). The door will then remain mechanically locked until a release signal is sent to the switch.
A fast and compact roll door that increases safety and protects against dust, noise and weld spatter. Patented safety features allow operators to work near the door.
An innovative new door type with the top roll behind the door that further increases operator safety as all moving parts are inside the cell.
NORDIC’s new developed control system for high performance doors with optimal safety. The drive system is user-friendly – easy to install, service and maintain.
How can a machine protection door contribute to a safer workplace? | Our machine protection doors are equipped with advanced safety features that allow employees to work safely close to the door. The doors protect against welding splatter, noise and dust, reducing the risk of injury and improving the working environment. |
How quick is a door? | Our doors are extremely fast and can open at a speed of up to 2,5 m/s. This helps to streamline the work flow and minimizes wait times. |
Can a machine protection door save space in the production? | Yes, our doors can be placed close to the work site and are designed to save space, which is especially valuable in smaller premises or confined spaces. |
What sizes are available? | We offer standard sizes up to 4×4 m. If you have specific needs, we can tailor the doors to suit your specific needs. |
Why are the NORDIC machine protection doors so cost effective? | Thanks to their robust design, long durability and low operating costs, our doors are a long-term economical investment. Plus, they’re easy to maintain, further reducing costs over time. |
Where are the NORDIC machine production door manufactured? | We develop and manufacture all our machine protection doors in Halmstad. This means that we are close to both expertise and quick access to spare parts, as well as the possibility of customized solutions if needed. |
Can the doors be adapted to specific needs? | Absolute. Our machine protection doors can be fully adapted to your requirements, both in terms of size and function. We work with you to ensure that the doors meet all your needs. |
Are the doors silent when used? | Yes, our doors are designed to be very quiet during operation, which contributes to a more comfortable working environment without disturbing noise. |
Are spare parts easily available? | Since we manufacture the doors in Halmstad where we also keep a large stock of parts for our production, we can offer quick and easy access to spare parts. This minimizes downtime and ensures a high level of reliability. |
For further information
We always answer within 24h.
Call our switchboard and we'll connect you to the right person!
Contact us
We always answer within 24h.
Call our switchboard and we'll connect you to the right person!
Get contacted
